BRAMCO布莱姆科 输送机控制Conveyor Control
1. BK300 (BK200) Pullkey 安全装置 safety device :
BK300M
BK300N
BK300E
BK300F
BK300P
BK300C
BK300A
BK300X
Code Description
M Standard Monitoring Node
Provides indication of individual Pullkey trip
status mounted along a conveyor.
N ICMS Monitoring Node
Used in conjunction with Bramco’s
Integrated Control and Management System
(ICMS). Provides individual Pullkey status
information via the ICMS Data Screen.
E Emergency Release Pin
The e-pin, mounted on one or both sides of
the Pullkey, provides an additional and
instantaneous trip release.
F Indication Flag
Fluorescent trip indication system mounted
on the operating knob of the Pullkey.
Provides easy visual identification of a
tripped Pullkey.
P Brass Plugs
Compatible with Bramco’s Pullcable
complete with 6 pole Brass Sockets.
C Amplifier or PSW Module Plug
Allows convenient plug in of either Bramco’s
Communication Amplifiers or Bramco PSW
Modules. (See separate data sheets).
A Pre-Start Warning Module
Mounted adjacent to the Pullkey. Provides
visual and audio Pre-Start Warning of
conveyor start-up. Complete with I.S.
Battery or power supply – AC or DC.
X Xenon Flasher
Mounted adjacent to the Pullkey. Provides
optimal visual indication of either Pre-Start
Warning for conveyor start-up, Pullkey trip
status or Gas warning.
2. BK400 Pullkey 安全装置 safety device :
BK400S
BK400D
3. CCMS 输送机控制及管理系统Conveyor Control & Management System :
System 1 – Basic Stop, Start and Sequence
System 2 – Basic Monitoring and Control
System 3 – Comprehensive Monitoring and Control with Backup features
System 4 – Communication and Pre-Start Warning
System 5 – Broadcast Fault Messages
System 6 – Telephone
ICMS V5
ICMS 2
ICMS
4. 启动前的预警系统Pre-Start Warning System :
* Pre-Start Warning 100
A00357 Pre-Start Warning Alarm Standard
A00001 Pre-Start Warning Alarm Visual
A00348 I.S Battery Interface
A00722B Pre-Start Warning 2 Fault Monitor Relay
A00504 Pre-Start Warning Alarm (modified)
* PSW 400 – Pre Start Warning
A00986 – PSW400 Assembly
A01108 – PSW400 Fused Capacitor Pack 1A fuse 3.3R
A00722B- PSW2 Control Relay
5. ESS Mk II电子调速开关Electronic Speed Switch :
A00596 ESS MkII Module and Base
A00206 ESS MkII Remote Screen
A00237 ESH Electronic Sensing Head
E70174 I.S Dual Channel Barrier
6. BA200迷你放大器通信系统Mini Amp Communication System :
A00551 Master Amplifier – 16 button keypad
A00550 Slave Amplifier – 4 button keypad
A00552 Slave Amplifier – 16 button keypad
A00675 Mini Slave Amplifier – 4 button keypad
A00676 Mini Slave Amplifier-16 button keypad
7. SLC2 信号线控制模块/继电器Signal Line Control SLC2 :
A00718C SLC2 Module
A00721C EOL Terminator with Seq
A00725C Side Sequence Module
A00720 SLM2 Module Standard
A00724 SLM2 Remote Screen
A00265 SLM2 Bug Standard
A00920 SLM3 Module
A00921 SLM3 Addressable bug
8. SLM2信号线监控模块/继电器Signal Line Monitor SLM2 ：
SLM2 Module A00720
Remote Display A00724
SLM2 Bug A00729
9. SLM3信号线监控模块/继电器Signal Line Monitor SLM3 ：
A00920 SLM3 Module
A00921 SLM3 Addressable Bug
A00718B SLC2 Module
A00721B SLC2 EOL Bug
A00725B Side Sequence Bug
A00724 SLM2 Remote Screen
10. Belt Rip Detection 皮带裂口探测器 :
A01385 Belt Rip Detector
11. 信号线电缆Pullwire and Signal Line Cables :
4芯 4 x 24/0.20 .75mm2 E00035
6芯 6 x 24/0.2 .75mm2 E00032
6芯 2 x 44/0.30 3.1mm2 + 4 x 24/0.20 .75mm2 E00036
8芯 4 x 44/0.30 3.1mm2 + 4 x 24/0.20 .75mm2 E00038
6芯 2 x 84/0.30 6mm² + 4 x 30/0.25 1.5mm² E00039
2芯 2 x 84/ 0.30 6mm² E00108
12. LCMS控制及管理系统 Long Wall Control & Management System :
* LCMS Control Module
DR1
DR2
DR3
* **************************************** *
System 1
Basic stop, start and sequence
System 2
Basic monitoring and control
System 3
Comprehensive monitoring and control
including redundancy feature
System 4
Communication and Pre-Start Warning
System 5
Broadcast fault messages
System 6
Voice and Telephone Interface
……更多布莱姆科BRAMCO E L E C T R O N I C S电气产品，请来电咨询：